Products Features
- POSITIVE DRIVE: Use a hammer to drive the nail to expand the anchor
- POSITIVE SETTING: When the head of the nail meets the anchor body then the anchor is set
- CAN SET EMBEDMENT DEPTH: Provides uniformity and consistent look when all the anchors are set
- SLOTTED BODY IS PRECISION MATCHED TO TAPERED EXPANSION NAIL: Ensures that the anchor is uniformly expanded to provide consistent holding values in concrete
- NUTS AND WASHERS INCLUDED: Ready to install; creates simple and fast installation process
Products specifications
| Bit Size | 1/2″ |
| Box Qty | 50 |
| Minimum Embedment | 2″ |
| Wrench Size For Nut | 3/4″ |
| Primary | Concrete only |
| Thread Type | 1/2″ – 13 |
| Minimum Edge Distance | 2-1/2″ |
| Maximum Fixture Thickness | 1/4″ |
| Minimum Fixture Hole Diameter (In Place) | 9/16″ |
| Minimum Fixture Hole Diameter (Hole Spotted) | 1/2″ |
| Brand Name | CONFAST® |
| Minimum Spacing | 5″ |
| Thread Length | 1″ |
| 2000 PSI Concrete – Pull-Out (lbs.) * | 2700 |
| 2000 PSI Concrete – Shear (lbs.) * | 5400 |
| Length Measurement | End to End |
| Diameter | 1/2″ |
| Length | 2-3/4″ |
| Material | Carbon Steel Yellow Zinc |
| Environment | Dry |
| Type | Male |
* Values shown are average ultimate values and are offered only as a guide and are not guaranteed. A safety factor of 4:1 or 25% is generally accepted as a safe working load
No products in the cart.